Skip to main content

Venting Greens...




This week we will be venting our greens with needle tines. These tines make a hole that is less than an 1/8th of inch. With our greens being completely saturated from the incredible amount of rain that we have recieved this season, there is no room for air movement in the soil. We need to create very small channels for air movement to the root zone. When roots don't have air, they die. This has not been evident yet, but with the warmer temperatures of July upon us soon, trouble could be lurking. This will be a very non-disruptive process to our members and play. We are going to vent all of our greens over then next few days early in the morning as to not disrupt play. The process is simple, we vent the green using the aerifier and needle tines, roll them smooth and then mow the green. The holes virtually dissapear and are of no effect to roll. I realize that the word aerifier starts to scare people, but this is necessary and again is very clean and non-disruptive. Check out the pictures above, the tine is dwarfed by a pen and you can see how small the holes are compared to a golf ball.

Comments

Post a Comment

Popular posts from this blog

Bunker construction on # 17

The past few days we have been able to make great strides on the bunker project on #17. All three of the new bunkers have been shaped and drained. Tuesday morning Ian Andrew our consulting golf course architect, will be painting the final contours in the bunkers. We will then install the bunker boards and back fill with topsoil to the new edges. Once the edges are established we will add the new sand and await sod. The rain and snow that we recieved over the last couple of days has had little effect on the rough shaping process. We are hoping for some drier days to complete the fine tuning and sod prepping.

Golf Course Update

As our season slowly comes to a end our department has been working away at year end projects. We installed drainage in a few areas of the practice range and short game area. These areas were perpetually wet and caused turf and aesthetic issues. We have also been chipping away at the bunkers on #17, smoothing out the faces and recreating the grass edges. These bunkers suffered some severe frost heaving in the faces during the winter after they were built. Our team has removed a number of trees and brush from around our maintenance facility to allow some expansion of our operation. We are working away at clearing space to install aggregate bins and sufficient staff parking. This will also allow delivery trucks and semi's to access our facility without any issues. We are also removing the fallen trees and brush from the woodlot on the right side of #16 fairway. This is a challenging area to work as it is a peat bog and remains wet even in the hottest and driest of summers (like 2010)...

Finish Grading on #2 & #12 Tees

With the great weather that we have had the last two days, we were able to get the tees shaped and all of the tee mix out to the tees. In this picture here, Derek Vergeer (our contractor) is finish grading #2 Tee to be ready for sod. Unfortunately the forecast is for rain the next couple of days and could hold us up for a bit. We are doing out best to complete these projects in a timely manner, of course with this blog we will keep you updated.